AJA Bridge Live power control uses IPMI instead of Wake-on-LAN. Use SSH to prepare the IPMI user, then add the AJA LAN IPMI address and credentials in the app.
Log in to the ABL CLI
ssh transcoder@<abl-ip-address>
Find the IPMI LAN address
sudo ipmitool lan print
Confirm the admin user number
The admin user is usually user 2, but confirm it before changing the password.
sudo ipmitool user list
Set or reset the IPMI password
sudo ipmitool user set password 2
Enable admin IPMI access
sudo ipmitool user enable 2
sudo ipmitool channel setaccess 1 2 link=on ipmi=on callin=on privilege=4
Fix channel cipher suites
Allow the standard LAN channel cipher suites and explicitly permit cipher suite 3.
sudo ipmitool channel setaccess 1 2 callin=on ipmi=on link=on privilege=4
sudo ipmitool raw 0x06 0x40 0x01 0x42 0x44
Add the device in the app
Click ABL and enter the device name, the AJA LAN 1 IPMI IP, the AJA IP address and the IPMI username and password. Passwords are saved on this computer with the rest of the app settings.